Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
-
Fig 1: Exploded View Of Compressor Air Intake Turbocharger Components - Right Side With Tightening Sequence
Courtesy of GENERAL MOTORS COMPANY
Turbocharger Gasket (1) - Install NEW
- Turbocharger (2) - Install
- Turbocharger Bolt (3) - Install and tighten in sequence [4x] 58 N.m (43 lb ft)
- Turbocharger Oil Feed Pipe - Right Side @ Turbocharger - Connect - Turbocharger Oil Feed Pipe Replacement - Right Side
Turbocharger Coolant Feed and Return Pipe-Right Side (1) - Install - Turbocharger Coolant Feed and Return Pipe Replacement - Right Side (LGY)
Install the right side lower turbocharger heat shield (3). Turbocharger Heat Shield Replacement - Right Side Lower (LGY)
Warm Up Three-Way Catalytic Converter - Right Side (1) - Install - Warm Up Three-Way Catalytic Converter Replacement - Right Side (LGY)
Engine Mount Bracket-Right Side (2) - Install - Engine Mount Bracket Replacement - Right Side (AWD) , or Engine Mount Bracket Replacement - Right Side (RWD)
Turbocharger Air Inlet Adapter-Bank 1 (2) - Install - Turbocharger Air Inlet Adapter Replacement - Bank 1
CAUTION:
Refer to Fastener Caution .