Charge Air Cooler Cover Assemble
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Charge Air Cooler Cover Seal (5) - Install a NEW seal.
- Throttle Body Gasket (4) - Install a NEW gasket.
- Throttle Body (3) - Install
- Throttle Body Bolt (2) - Install and tighten to 10 N.m (89 lb in) [4x]
- Throttle Actuator Wire (1) - Install
Charge Air Cooler Housing Gasket (4) - Install a NEW gasket.
- Charge Air Cooler - Right Side (3) - Install
- Charge Air Cooler Inlet Air Tube Bolt (2) - Install and tighten to 12 N.m (106 lb in) [6x]
- Charge Air Cooler Retainer (1) - Install [6x]
Charge Air Cooler Housing Gasket (4) - Install a NEW gasket.
- Charge Air Cooler - Left Side (3) - Install
- Charge Air Cooler Inlet Air Tube Bolt (2) - Install and tighten to 12 N.m (106 lb in) [6x]
- Charge Air Cooler Retainer (1) - Install [6x]
Intake Air Pressure and Temperature Sensor (2) - Install
- Manifold Absolute Pressure Sensor (3) - Install
- Intake Air Pressure and Temperature Sensor Bolt (1) - Install and tighten to 4 N.m (35 lb in)
- Manifold Absolute Pressure Sensor Bolt (1) - Install and tighten to 4 N.m (35 lb in)
- Evaporative Emission Canister (4) - Install
Charge Air Cooler Coolant Hose (3) - Install
- Charge Air Cooler Coolant Hose Clamp (2) - Install [4x]
- Charge Air Cooler Coolant Manifold Bolt (1) - Install and tighten to 10 N.m (89 lb in) [2x]
Charge Air Cooler Insulator (2) - Install
- Charge Air Cooler Insulator Retainer (1) - Install [6x]
CAUTION:
Refer to Fastener Caution .