LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 326 (Engine Mechanical - 3.0L (LGY) - Repair Instructions) >> Repair Instructions >> Accessory Drive Auxiliary Belt Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4249648Courtesy of GENERAL MOTORS COMPANY

    Install EN-51767-2  Universal Stretchy Belt Installer (1) onto the crankshaft balancer.

  2. Position the accessory drive auxiliary belt (2) on the generator pulley and crankshaft balancer as shown.
  3. Slowly rotate the crankshaft balancer in a clockwise direction while using finger pressure to pull the accessory drive auxiliary belt (2) forward.
  4. Inspect the accessory drive auxiliary belt for proper installation and alignment.
  5. Rotate the crankshaft balancer and additional 360 degrees to ensure proper installation of the accessory drive auxiliary belt.
  6. Air Cleaner Assembly - Install - Air Cleaner Assembly Replacement
scientia non olet · About LEMON Manuals