Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Upper Intake Manifold Bracket (2) - Install
- Upper Intake Manifold Cover Nut (1) - Install and tighten [2x] 9 N.m (80 lb in)
Upper Intake Manifold Cover Bracket Bolt (1) @ Upper Intake Manifold Bracket (2) - Install and tighten [2x] 9 N.m (80 lb in)
Wiring Harness (4) - Reposition
- Retainer (2) @ Upper Intake Manifold Bracket (3) - Install
- Electrical Connector (1) - Connect [3x]
- Intake Manifold Cover - Install - Intake Manifold Cover Replacement
CAUTION:
Refer to Fastener Caution .