Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Transmission Fluid Cooler Pipe (2) - Install
- Transmission Fluid Cooler Pipe (2) - Connect
- Retainer Clip (1) - Engage [2x]
- Transmission Fluid Cooler Pipe Bracket Bolt (3) - Install and tighten to 9 N.m (80 lb in)
- Transmission Fluid Cooler Pipe Bolt (4) - Install and tighten to 22 N.m (16 lb ft)
- Lower the vehicle.
- Check the transmission fluid level. Transmission Fluid Level and Condition Check
- Inspect for transmission fluid leaks. Fluid Leak Diagnosis
CAUTION:
Refer to Fastener Caution .