Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Transmission Fluid Auxiliary Cooler Outlet Pipe (2) - Install
- Transmission Fluid Auxiliary Cooler Outlet Pipe (2) - Connect
- Retaining Clip (3) - Engage
- Transmission Fluid Cooler Pipe Clip (1) - Engage [2x]
- CAUTION:
Refer to Fastener Caution .
Transmission Fluid Cooler Pipe Clamp Bolt (1) - Install and tighten - [2x] 9 N.m (80 lb in)
Transmission Fluid Auxiliary Cooler Outlet Pipe (5) - Connect
- Retaining Clip (3) @ Transmission Fluid Auxiliary Cooler Outlet Pipe (5) - Engage
- Lower the vehicle.
- Check the transmission fluid level. Transmission Fluid Level and Condition Check
- Inspect for transmission fluid leaks. Fluid Leak Diagnosis