Installation Procedure
Transmission Fluid Auxiliary Cooler Bracket (2) - Install
- Transmission Fluid Auxiliary Cooler Bracket Bolt (1) - Install and tighten to 9 N.m (80 lb in)
Auxiliary Radiator Front Inlet Duct (1) - Install - Auxiliary Radiator Front Inlet Duct Replacement - Left Side (LGY) , or Auxiliary Radiator Front Inlet Duct Replacement - Left Side (LT4)
Radiator Air Front Lower Baffle (1) - Install - Radiator Air Front Lower Baffle Replacement (LSY) , or Radiator Air Front Lower Baffle Replacement (LGY) , or Radiator Air Front Lower Baffle Replacement (LT4)
Transmission Fluid Auxiliary Cooler (1) - Install - Transmission Fluid Auxiliary Cooler Replacement (LSY, RWD, with V03) , or Transmission Fluid Auxiliary Cooler Replacement (LGY, AWD, RWD) , or Transmission Fluid Auxiliary Cooler Replacement (Blackwing)
Front Bumper Fascia (1) - Install - Front Bumper Fascia Replacement (without Blackwing) , or Front Bumper Fascia Replacement (with Blackwing)
- Lower the vehicle.
- Check the transmission fluid level. Transmission Fluid Level and Condition Check
- Inspect for transmission fluid leaks. Fluid Leak Diagnosis
Refer to Fastener Caution .