LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Body Wiring Harness Junction Block Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection
  2. GM5315648Courtesy of GENERAL MOTORS COMPANY

    Engine Wiring Harness Fuse Block Bracket (2) - Remove - Engine Wiring Harness Fuse Block Bracket Replacement

  3. Disconnect any harness retainers attached to the body wiring harness junction block bracket (3).
  4. GM5315881Courtesy of GENERAL MOTORS COMPANY

    Body Wiring Harness Junction Block Bracket Bolt (1) - Remove [2x]

  5. Body Wiring Harness Junction Block Bracket (2) - Remove
scientia non olet · About LEMON Manuals