LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Body Wiring Harness Junction Block Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5315881Courtesy of GENERAL MOTORS COMPANY

    Body Wiring Harness Junction Block Bracket (2) - Install

    2. CAUTION:

    Refer to Fastener Caution

  2. Body Wiring Harness Junction Block Bracket Bolt (1) - Install and tighten [2x] 9 N.m (80 lb in)
  3. Connect any harness retainers to the body wiring harness junction block bracket (2).
  4. GM5315648Courtesy of GENERAL MOTORS COMPANY

    Engine Wiring Harness Fuse Block Bracket (2) - Install - Engine Wiring Harness Fuse Block Bracket Replacement

  5. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals