Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Install the generator (1) along with the lower generator mounting bolt (2).
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution

Generator Bolt (2) - Install and Tighten 22 N.m (16 lb ft)
Generator Bolt (1) - Install and Tighten 22 N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Intake manifold is transparent.

Auxiliary Generator Battery Jumper Cable (2) - Install
Battery Positive Cable Nut (1) @Generator - Install and Tighten 15 N.m (11 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (1) - Connect
Courtesy of GENERAL MOTORS COMPANY

Charge Air Cooler Outlet Air Tube (2) @Throttle Body - Install - Charge Air Cooler Outlet Air Tube Replacement
Courtesy of GENERAL MOTORS COMPANY

Intake Manifold Cover (1) - Install - Intake Manifold Cover Replacement
Courtesy of GENERAL MOTORS COMPANY

Accessory Drive Primary Belt (1) - Install - Accessory Drive Primary Belt Replacement
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection