Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Engine Wiring Harness Junction Block (2) - Install
- Retaining Tab (3) - Engage [4x]
- Engine Wiring Harness Junction Block Bolt (1) - Install and Tighten 9 N.m (80 lb in)
Engine Wiring Harness Fuse Block Cover (2) - Install - Engine Wiring Harness Fuse Block Cover Replacement
Battery Distribution Engine Compartment Fuse Block (2) - Install - Battery Distribution Engine Compartment Fuse Block Replacement (LSY) , or Battery Distribution Engine Compartment Fuse Block Replacement (LGY)
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution