Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify DTC B1B12 is not set
- DTC B1B12 is set
- Go to next step: DTC B1B12 is not set
- Open the drivers door.
- Verify that the KR76 Accessory Time Delay Cutoff Relay cycles on and off while switching the ignition between Run and OFF. by verifying a click is heard and/or felt.
- If a click is not heard and/or felt
Refer to: Power Mode Mismatch
- Go to next step: If a click is heard and/or felt
- If a click is not heard and/or felt
- Refer to: The appropriate diagnosis for your device(s) that are inoperative.