Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Rear Window (2) - Install - Adhesive Installation of Rear Windows
High Mount Stop Lamp (2) - Install - High Mount Stop Lamp Replacement
- Connect the defrost tab electrical connectors.
- Quarter Upper Trim Panel - Install - Quarter Upper Trim Panel Replacement
- Remove the tape.
- Remove any remaining adhesive residue with a 50/50 mixture by volume of isopropyl alcohol and clean drinkable water. Wipe the surface dry with a clean lint-free towel.