LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Fixed And MOVEABLE Windows) >> Repair Instructions >> Rear Side Door Window Belt Reveal Molding Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5318453Courtesy of GENERAL MOTORS COMPANY

    Press firmly to install the rear side door window belt reveal molding (1) on the door flange.

  2. GM5318442Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Rear Side Door Window Belt Reveal Molding Bolt (1) - Install and tighten [2x] 1.5 N.m (13 lb in)

  3. Inspect the window for proper operation.
scientia non olet · About LEMON Manuals