Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector.
Front Seat Belt Anchor Plate Tensioner (2) - Install
- Front Seat Belt Anchor Plate Tensioner Bolt - Lower (1) - Install and tighten 45 N.m (33 lb ft)
Center Pillar Lower Trim Panel (1) - Install
Front Seat Belt Anchor Plate Tensioner Bolt- Upper (2) - Install and tighten 6 N.m (53 lb in)
- Front Seat Belt Anchor Plate Tensioner Cover (1) - Install
- Enable the SIR System. SIR Disabling and Enabling
CAUTION:
Refer to Fastener Caution .