LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 297 (Supplemental Restraints System) >> Diagnostic Information and Procedures >> DTC B17F0 or B17F2 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The condition may be intermittent and require driving the vehicle, then reviewing the snapshot to verify resistance parameters do not drop out or spike. Refer to Testing for Intermittent Conditions and Poor Connections

  1. Ignition ON.
  2. Verify that DTC B17F2 or B17F0 symptom byte 81 is not set as current.
    • If DTC B17F2 or B17F0 symptom byte 81 is set as current 

      Replace the appropriate B63 Side Impact Sensor.

    • Go to next step: If DTC B17F2 or B17F0 symptom byte 81 is not set as current 
  3. Verify that DTC B17F2 or B17F0 symptom byte 11 or 15 is not set as current.
    • If DTC B17F2 of B17F0 symptom byte 11 or 15 is set as current 

      Refer to Circuit/System Testing.

    • Go to next step: If DTC B17F2 or B17F0 symptom byte 11 or 15 is not set as current 
  4. A fault is not currently present and may be an intermittent condition.
scientia non olet · About LEMON Manuals