LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 297 (Supplemental Restraints System) >> Diagnostic Information and Procedures >> DTC B10BD >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The condition may be intermittent and require driving the vehicle, then reviewing the snapshot to verify resistance parameters do not drop out or spike. Refer to Testing for Intermittent Conditions and Poor Connections

  1. Verify that DTC B10BD with symptom byte 11, 12 or 13 is not set.
    • If DTC B10BD 11, B10BD 12 or B10BD 13 is set. 

      Replace the S40 Instrument Panel Airbag Disable Switch.

    • Go to next step: If DTC B10BD 11, B10BD 12 or B10BD 13 is not set. 
  2. Verify that DTC B10BD is not set.
    • If DTC B10BD is set. 

      Refer to Circuit/System Testing.

    • Go to next step: If DTC B10BD is not set. 
  3. A fault is not currently present and may be an intermittent condition.