LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 296 (Instrument Panel And Console Trim) >> Repair Instructions >> Instrument Panel Upper Trim Panel Replacement - Left Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5318304Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Upper Trim Panel - Left Side (3) - Install

  2. CAUTION:

    Refer to Fastener Caution .

  3. Instrument Panel Upper Trim Panel Bolt (2) - Install and tighten [3x] 2.5 N.m (22 lb in)
  4. Instrument Panel Bolt (1) - Install and tighten to 2.5 N.m (22 lb in)
  5. GM5314053Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Instrument Cluster Hood (2) - Install - Instrument Panel Instrument Cluster Hood Replacement 

  6. GM5315161Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Cluster Trim Plate Applique (1) - Install - Instrument Panel Cluster Trim Plate Applique Replacement 

  7. GM5316068Courtesy of GENERAL MOTORS COMPANY

    Side Window Defogger Outlet Grille (2) - Install - Side Window Defogger Outlet Grille Replacement

  8. GM5316863Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster (1) - Install - Instrument Panel Knee Bolster Replacement 

  9. GM5310879Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Insulator - Left Side (1) - Install - Instrument Panel Lower Trim Panel Insulator Replacement - Left Side 

  10. GM5314041Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Airbag - Driver Side (2) - Install - Instrument Panel Lower Airbag Replacement - Driver Side

  11. GM5309230Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Outer Trim Cover (1) - Install - Instrument Panel Outer Trim Cover Replacement 

  12. Install the left windshield garnish molding. Windshield Garnish Molding Replacement