Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Trim Plate (1) - Remove - Front Floor Console Trim Plate Replacement (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Trim Panel (1) - Remove - Front Floor Console Rear Trim Panel Replacement (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Reposition the seat as necessary to access the retaining clips.
Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Extension Panel - Right Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Reposition the seat as necessary to access the retaining clips.
Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Extension Panel - Left Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a suitable plastic trim tool, release the retaining tabs.
Disconnect the electrical connectors.
Multimedia Receptacle (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Quantity of clips and routing of the front floor console wiring harness may vary based on option content.

Release the wiring harness clips and connectors on the front floor console wiring harness (1).
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Quantity of clips and routing of the front floor console wiring harness may vary based on option content.

Release the wiring harness clips on the front floor console wiring harness (1).
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Quantity of clips and routing of the front floor console wiring harness may vary based on option content.

Release the wiring harness clips and connectors and remove the front floor console wiring harness (1) from the front floor console.