Removal Procedure
Front Floor Console (1) - Remove - Front Floor Console Removal and Installation (Blackwing)
Front Floor Console Rear Trim Panel (1) - Remove - Front Floor Console Rear Trim Panel Replacement (Blackwing)
Using a flat-bladed plastic trim tool, release the retaining clips.
- Reposition the front floor console trim plate (1) to access the electrical connectors.
- Disconnect the electrical connectors.
Front Floor Console Trim Plate (1) - Remove
Front Floor Console Cup Holder Bolt (1) - Remove [6x]
Front Floor Console Armrest Bolt (1) - Remove [2x]
- Front Floor Console Cup Holder Bolt (2) - Remove [5x]
- Remove the front floor console bin lamp (3) from the front floor console cup holder.
Using a flat-bladed plastic trim tool, release the retaining clips.
- Reposition the component to access the electrical connectors.
- Disconnect the electrical connector.
- Front Floor Console Cup Holder (1) - Remove
- NOTE:
Quantity of clips and routing of the front floor console wiring harness may vary based on option content.
Release the wiring harness clips and connectors on the front floor console wiring harness (1).
- NOTE:
Quantity of clips and routing of the front floor console wiring harness may vary based on option content.
Release the wiring harness clips on the front floor console wiring harness (1).
- NOTE:
Quantity of clips and routing of the front floor console wiring harness may vary based on option content.
Release the wiring harness clips and remove the front floor console wiring harness (1) from the front floor console retainer (2).