Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Accessory Power Rear Receptacle Retainer (1) - Remove - Front Floor Console Accessory Power Rear Receptacle Retainer Replacement (Front Floor Console Armrest Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Trim Plate (1) - Remove - Front Floor Console Trim Plate Replacement (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Trim Panel (1) - Remove - Front Floor Console Rear Trim Panel Replacement (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Reposition the seat as necessary to access the retaining clips.
Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Extension Panel - Right Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Cup Holder Bolt (1) - Remove [6x]
Courtesy of GENERAL MOTORS COMPANY

Reposition the seat as necessary to access the retaining clips.
Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Extension Panel - Left Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Armrest Bolt (1) - Remove [2x]
Front Floor Console Cup Holder Bolt (2) - Remove [5x]
Remove the lens of the front floor console bin lamp (3) from the front floor console cup holder.
Courtesy of GENERAL MOTORS COMPANY

Multimedia Receptacle (1) - Remove - Multimedia Receptacle Replacement (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Starting from the rear of the front floor console cup holder (1), release the retaining clips and work your way forward.
Courtesy of GENERAL MOTORS COMPANY

Pull back to clear the two forward guide pins.
Reposition the component to access the electrical connectors.
Disconnect the electrical connector.
Front Floor Console Cup Holder (1) - Remove
Transfer components as necessary.