Fastener Specifications
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Front Seat Back Frame Reinforcement Rivet |
| Front Seat Back Upper Support Rivet |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Driver or Passenger Seat Back Frame Bolt | 45 N.m (33 lb ft) |
| Driver or Passenger Seat Bolt | 45 N.m (33 lb ft) |
| Front Seat Adjuster Finish Cover Bolt | 8 N.m (71 lb in) |
| Front Seat Back Finish Panel Bolt | 3 N.m (27 lb in) |
| Front Seat Bolt | 45 N.m (33 lb ft) |
| Front Seat Bolt @ Front Seat Inner Adjuster Front Finish Cover | 4 N.m (35 lb in) |
| Front Seat Cushion Front Extension Frame Nut | 4.7 N.m (42 lb in) |
| Front Seat Cushion Front Finish Cover Fastener | 4 N.m (35 lb in) |
| Front Seat Cushion Outer Finish Cover Fastener - Front | 4 N.m (35 lb in) |
| Front Seat Cushion Outer Finish Cover Fastener - Rear | 4 N.m (35 lb in) |
| Front Seat Upper Bolt | 45 N.m (33 lb ft) |
| Front Seat Vent Fan Control Module Bolt | 3 N.m (27 lb in) |
| Rear Seat Armrest Fastener | 3 N.m (27 lb in) |
| Rear Seat Back Bolster Nut | 9 N.m (80 lb in) |
| Rear Seat Back Cushion Hinge Fastener | 45 N.m (33 lb ft) |
| Rear Seat Back Cushion Latch Bolt | 45 N.m (33 lb ft) |
| Rear Seat Back Outer Pivot Bolt | 23 N.m (17 lb ft) |