Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connectors.
- Rear Bumper Fascia (1) - Install
Secure the 3 left and right side rear bumper fascia retainer clips (1) to the rear bumper fascia reinforcement.
Install the rear bumper fascia (1) on the left and right side to the rear fascia guides.
- CAUTION:
Refer to Fastener Caution .
Rear Bumper Fascia Bolt (1) - Install and tighten [7x] 2.5 N.m (22 lb in)
Install the 2 left side rear fascia bolts (1) and tighten to 2.5 N.m (22 lb in)
Install the 2 right side rear fascia bolts (1) and tighten to 2.5 N.m (22 lb in).
- Install the right and left rear wheelhouse liner bolts. Rear Wheelhouse Liner Replacement