Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia (1) - Remove - Front Bumper Fascia Replacement (with Blackwing)
Courtesy of GENERAL MOTORS COMPANY

{ If equipped }Forward Range Radar Bracket Bolt (1) - Remove [3x]

NOTE:

Forward range radar sensor will be with the bracket.

{ If equipped }Forward Range Radar Bracket (2) - Remove
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Auxiliary Radiator Front Inlet Duct Retainer- Left Side and Right Side (1) - Remove [6x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Auxiliary Radiator Front Inlet Duct- Left Side and Right Side (1) - Reposition [2x]
Transmission Fluid Auxiliary Cooler Bracket Bolt- Left Side and Right Side (2) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Horn Bolt (1) - Left Side and Right Side - Remove [2x]
Horn- Left Side and Right Side (2) - Reposition [2x]
Courtesy of GENERAL MOTORS COMPANY

Reposition the wiring harness.
Front Bumper Impact Bar Bolt (1) - Remove [8x]
Front Bumper Impact Bar (2) - Remove