Front Bumper Impact Bar Replacement (LSY)

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Front Bumper Fascia Support Brace Replacement (Without Radar) Front Bumper Fascia Support Brace Replacement (With Radar) Horn Replacement Release the 7 retainers and wiring harness from the fron bumper impact bar.
1	Radiator Air Front Lower Baffle Retainer [2x]
2	Front Bumper Impact Bar Bolt [8x] CAUTION: Refer to Fastener Caution . Tighten 32 N.m (24 lb ft)
3	Front Bumper Impact Bar Procedure Transfer components as necessary.