Front Side Door Sill Garnish Molding Replacement

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Instrument Panel Outer Trim Cover Replacement
1	Front Side Door Sill Garnish Molding Procedure Starting at the rear of the garnish molding, pull upward at the B-Pillar joint to disengage garnish molding. Work your way forward disengaging all of the garnish molding clips then pull rearward to disengage the clip on the forward vertical wall. Reposition the front floor panel carpet as needed.

Callout

Component Name

Preliminary Procedure
Instrument Panel Outer Trim Cover Replacement

Front Side Door Sill Garnish Molding

Procedure

Starting at the rear of the garnish molding, pull upward at the B-Pillar joint to disengage garnish molding.
Work your way forward disengaging all of the garnish molding clips then pull rearward to disengage the clip on the forward vertical wall.
Reposition the front floor panel carpet as needed.