Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
The paint surface must be clean and dry before installation of a new emblem/nameplate (1).
- Temperature ranges required for installation of a new emblem (1) are 16°C (60°F) - 43°C (110°F) for the body, and the emblem/nameplate.
- General surface contaminants, such as dirt, dust, fingerprints, moisture, oil, etc., can be removed with a dry cleaning cloth from 3M (Scotch Brite High Performance Cloth), or Contec (Thunderbolt Cloth).
- Rear Compartment Lid Inner Panel Trim - Install - Rear Compartment Lid Inner Panel Trim Replacement