Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft Position Sensor (1) - Install
Install the camshaft position sensor wire (1).
Connect the and the engine wiring harness connector (1), oil pump flow control valve connector (2), camshaft position actuator solenoid connector (3), camshaft position sensor connector (4).
- CAUTION:
Refer to Fastener Caution .
Camshaft Position Sensor Bracket Bolt (1) - Install and tighten [2x] 25 N.m (18 lb ft)
- Air Conditioning Compressor Belt - Install - Air Conditioning Compressor Belt Replacement
- Air Cleaner Outlet Duct - Install - Air Cleaner Outlet Duct Replacement