LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Engine Controls And Fuel - 3.0L (LGY) - Repair Instructions) >> Repair Instructions >> Fuel Injector Wiring Harness Replacement (Bank 2) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5517126Courtesy of GENERAL MOTORS COMPANY

    Fuel Injector Wiring Harness (5) - Install

  2. Retainer Clip (3) @Fuel Injection Fuel Rail - Install [2x]
  3. Electrical Connector (4) @Indirect Fuel Injector - Connect [3x]
  4. Electrical Connector (2) @Fuel Injection Fuel Rail Fuel Pressure Sensor - Connect
  5. Cable Tie (1) Install NEW [3x]
  6. GM5516397Courtesy of GENERAL MOTORS COMPANY

    Direct Fuel Injection Fuel Rail-Bank 2 (1) - Install - Fuel Injection Fuel Rail Assembly Replacement - Bank 2