LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Intake Air Pressure and Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5420339Courtesy of GENERAL MOTORS COMPANY

    Intake Air Pressure and Temperature Sensor (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Intake Air Pressure and Temperature Sensor Bolt (1) - Install and tighten - Fastener Specifications
  3. GM5420336Courtesy of GENERAL MOTORS COMPANY
  4. Connect the electrical connector. (1)
  5. Perform the intake system learned values reset. Intake System Learned Values Reset 
scientia non olet · About LEMON Manuals