LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5300199Courtesy of GENERAL MOTORS COMPANY

    O-Ring (2) - Install NEW

  2. Fuel Tank Fuel Pump Module (1) - Install
  3. GM5300200Courtesy of GENERAL MOTORS COMPANY

    Transfer Hose (2) - Connect - Plastic Collar Quick Connect Fitting Service 

  4. Fuel Tank Vent Hose (3) - Connect - Plastic Collar Quick Connect Fitting Service 
  5. Electrical Connector (1) - Connect
  6. GM5300198Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Make sure lock ring is fully seated into the fuel tank encapsulated ring.

    Fuel Sender Ring (1) - Install - CH - 45722  Fuel Sender Lock Ring Wrench (2)

  7. GM5300196Courtesy of GENERAL MOTORS COMPANY

    Evaporative Emission Canister Hose (4) - Connect - Plastic Collar Quick Connect Fitting Service 

  8. Fuel Tank Filler Evaporative Emission Valve Hose (3) - Connect - Plastic Collar Quick Connect Fitting Service 
  9. Fuel Pump Fuel Feed Hose (2) - Connect - Plastic Collar Quick Connect Fitting Service 
  10. Electrical Connector (1) - Connect [3x]
  11. Fuel Tank - Install - Fuel Tank Replacement