LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Fuel Injector Wiring Harness Replacement

Fuel Injector Wiring Harness Replacement

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
GM5311583Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts in the following chart represent components shown in graphic above.
Callout Component Name
Preliminary Procedure 
Fuel Injection Fuel Rail Insulator Replacement 
1 Fuel Injector Wiring Harness

Procedure

  1. Disconnect electrical wiring harness connectors as necessary.
  2. Unsnap fuel injector wiring harness from fuel rail to remove. Snap to install.