Fuel Feed Intermediate Pipe Replacement

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Intake Manifold Cover Replacement Relieve the fuel system pressure. Fuel Pressure Relief Reposition wiring harness as necessary.
1	Fuel Injection Fuel Feed Pipe Bolt CAUTION: Refer to Fastener Caution . Tighten 8.5 N.m (75 lb in)
2	Fuel Feed Intermediate Pipe CAUTION: Refer to Component Fastener Tightening Caution . NOTE: Install a NEW fuel feed intermediate pipe. Tighten 30 N.m (22 lb ft)

Callout

Component Name

Preliminary Procedures

Intake Manifold Cover Replacement
Relieve the fuel system pressure. Fuel Pressure Relief
Reposition wiring harness as necessary.

Fuel Injection Fuel Feed Pipe Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
8.5 N.m (75 lb in)

Fuel Feed Intermediate Pipe

CAUTION:

Refer to Component Fastener Tightening Caution .

NOTE:

Install a NEW fuel feed intermediate pipe.

Tighten
30 N.m (22 lb ft)