Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the oil fill cap.
 Courtesy of GENERAL MOTORS COMPANY
|
Lift up on the front of the intake manifold cover (1) as indicated.
 Courtesy of GENERAL MOTORS COMPANY
|
Intake Manifold Cover (1) @Upper Intake Manifold Bracket (2) - Remove
 Courtesy of GENERAL MOTORS COMPANY
|
Disconnect the engine oil pressure sensor electrical connector.
- Engine Oil Pressure Sensor (1) - Remove