Camshaft Position Sensor Replacement - Intake

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Intake Manifold Cover Replacement Disconnect and reposition electrical wiring harness connectors as necessary.
1	Camshaft Position Sensor Bolt CAUTION: Refer to Fastener Caution . Tighten 8.5 N.m (75 lb in)
2	Camshaft Position Sensor Procedure Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedures

Intake Manifold Cover Replacement
Disconnect and reposition electrical wiring harness connectors as necessary.

Camshaft Position Sensor Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
8.5 N.m (75 lb in)

Camshaft Position Sensor
Procedure
Disconnect the electrical connector.