LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 279 (Engine Cooling System - Repair Instructions) >> Repair Instructions >> Radiator Inlet Hose Replacement (LT4 Charge Air Cooler - Left Side to Charge Air Cooler Coolant Pump) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the charge air cooling system. Charge Air Cooling System Draining and Filling (LT4) 
  2. GM5873053Courtesy of GENERAL MOTORS COMPANY

    Radiator Inlet Hose Clamp (2) - Disengage - Hose Clamp Replacement Guidelines - Spring Type 

  3. Radiator Inlet Hose (1) @Charge Air Cooler Coolant Pump - Remove
  4. Remove the left front tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
  5. Reposition the front portion of the left front wheelhouse liner. Front Wheelhouse Liner Replacement , or Front Wheelhouse Liner Replacement (Blackwing)
  6. GM5873055Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Some components not shown for graphic clarity.

    Radiator Inlet Hose Clip (3) - Remove

  7. Using an appropriate tool, remove the radiator outlet hose retainer (1) from the radiator inlet hose connector.
  8. Radiator Inlet Hose (2) @Charge Air Cooler- Left Side - Remove
  9. Radiator Inlet Hose (2) - Remove