Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Radiator Air Lower Baffle (1) - Remove - Radiator Air Lower Baffle Replacement (LSY)
Courtesy of GENERAL MOTORS COMPANY

Radiator Air Upper Baffle (1) - Remove - Radiator Air Upper Baffle Replacement (LSY)
Air Cleaner Assembly - Remove - Air Cleaner Assembly Replacement
Engine Wiring Harness Retainer@Engine Coolant Fan - Remove
Engine Coolant Temperature Sensor Electrical Connector - Disconnect
Courtesy of GENERAL MOTORS COMPANY

Forward Lamp Wiring Harness (1) @Engine Coolant Fan Electrical Connector (2) - Disconnect
Courtesy of GENERAL MOTORS COMPANY

Radiator Upper Bracket- Left Side (2) - Remove - Radiator Upper Bracket Replacement - Left Side (LGY, LSY)
Courtesy of GENERAL MOTORS COMPANY

Radiator Upper Bracket- Right Side (3) - Remove - Radiator Upper Bracket Replacement - Right Side (LGY, LSY)
Courtesy of GENERAL MOTORS COMPANY

Air Conditioning Evaporator Tube Clip Bracket Bolt (4) @Engine Coolant Fan - Remove - Air Conditioning Refrigerant Heat Exchanger Replacement (LSY)
Courtesy of GENERAL MOTORS COMPANY

Without disconnecting the air conditioning refrigerant heat exchanger from the air conditioning condenser, remove the air conditioning condenser tube clip (2) from the engine coolant fan.
Courtesy of GENERAL MOTORS COMPANY

Engine Coolant Fan Bolt (2) - Remove [4x]
Engine Coolant Fan (3) @Radiator (1) - Remove
Transfer components as necessary.