Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Engine Coolant Fan (3) @Radiator (1) - Install

CAUTION:

Refer to Fastener Caution .

Engine Coolant Fan Bolt (2) - Install and tighten [4x] 7 N.m (62 lb in)
Courtesy of GENERAL MOTORS COMPANY

Install the air conditioning condenser tube clip (2) to the engine coolant fan.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Refer to the procedure link for torque specification.

Air Conditioning Evaporator Tube Clip Bracket Bolt (4) @Engine Coolant Fan - Install - Air Conditioning Refrigerant Heat Exchanger Replacement (LSY)
Courtesy of GENERAL MOTORS COMPANY

Radiator Upper Bracket- Right Side (3) - Install - Radiator Upper Bracket Replacement - Right Side (LGY, LSY)
Courtesy of GENERAL MOTORS COMPANY

Radiator Upper Bracket- Left Side (2) - Install - Radiator Upper Bracket Replacement - Left Side (LGY, LSY)
Courtesy of GENERAL MOTORS COMPANY

Forward Lamp Wiring Harness (1) @Engine Coolant Fan Electrical Connector (2) - Connect
Engine Coolant Temperature Sensor Electrical Connector - Connect
Engine Wiring Harness Retainer@Engine Coolant Fan - Install
Air Cleaner Assembly - Install - Air Cleaner Assembly Replacement
Courtesy of GENERAL MOTORS COMPANY

Radiator Air Upper Baffle (1) - Install - Radiator Air Upper Baffle Replacement (LSY)
Courtesy of GENERAL MOTORS COMPANY

Radiator Air Lower Baffle (1) - Install - Radiator Air Lower Baffle Replacement (LSY)