LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 279 (Engine Cooling System - Repair Instructions) >> Repair Instructions >> Engine Coolant Air Bleed Hose Replacement (Engine Coolant Flow Control Valve to Engine Coolant Exhaust Heater Pipe) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Cooling System Draining and Filling (LSY GE 47716) , or Cooling System Draining and Filling (LSY Static Fill) , or Cooling System Draining and Filling (LGY Static Fill) , or Cooling System Draining and Filling (LGY GE 47716) , or Cooling System Draining and Filling (LT4 Static Fill) , or Cooling System Draining and Filling (LT4 GE 47716) 
  2. GM5309180Courtesy of GENERAL MOTORS COMPANY

    Plenum Front Panel (1) - Remove - Plenum Front Panel Replacement (without Blackwing) , or Plenum Front Panel Replacement (with Blackwing)

  3. GM5323709Courtesy of GENERAL MOTORS COMPANY

    Transmission Vent Hose Retainer (1) @Engine Coolant Air Bleed Hose - Remove

  4. GM5323387Courtesy of GENERAL MOTORS COMPANY

    Hose Clamp (1) - Disengage [2x] - Hose Clamp Replacement Guidelines - Spring Type 

  5. Engine Coolant Air Bleed Hose (2) - Remove