Final Inspection

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Mount the tire to the wheel. Tire Dismounting and Mounting
After mounting and inflating the tire, check both beads, the repair and the valve stem with a water and soap solution in order to detect leaks.
If the tire continues to lose air, the tire must be dismounted and inspected again.
Balance the tire and wheel assembly. Tire and Wheel Assembly Balancing - Off Vehicle
Install the tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
Remove the support and lower the vehicle.

For additional tire puncture repair information, contact:

U.S. Tire Manufacturers Association

1400 K Street, N.W., Suite 900

Washington

20005-2403

Telephone: 202-682-4800

E-mail: info@ustires.org

Website: https://www.ustires.org/