Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Exhaust Muffler (1) - Remove - Exhaust Muffler Replacement (LSY) , or Exhaust Muffler Replacement (LGY) , or Exhaust Muffler Replacement (LT4)
- Remove the rear tire and wheel assemblies. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
Rear Stabilizer Shaft Link (2) @Rear Stabilizer Shaft - Separate [2x] - Stabilizer Shaft Link Replacement , or Stabilizer Shaft Link Replacement
Chassis Rear Wiring Harness Clip (1) - Remove
- Chassis Rear Wiring Harness - Reposition
Rear Stabilizer Shaft Clamp Stud (1) - Remove
- Rear Stabilizer Shaft Clamp Bolt (2) - Remove [3x]
- Rear Stabilizer Shaft Clamp (3) - Remove [2x]
Rear Stabilizer Shaft (1) - Remove