LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Rear Suspension) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
  3. GM5335480Courtesy of GENERAL MOTORS COMPANY

    Rear Stabilizer Shaft Link Bolt (1) - Remove

  4. GM5335483Courtesy of GENERAL MOTORS COMPANY

    Rear Stabilizer Shaft Link Nut (1) - Remove

  5. GM5335484Courtesy of GENERAL MOTORS COMPANY

    Rear Stabilizer Shaft Link (1) - Remove



  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. GM6070609Courtesy of GENERAL MOTORS COMPANY

    Rear Stabilizer Shaft Link Nut (1) - Remove

  3. Rear Stabilizer Shaft Link Bolt (2) - Remove
  4. GM6070610Courtesy of GENERAL MOTORS COMPANY

    Rear Stabilizer Shaft Link (1) - Remove and DISCARD