LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Rear Suspension) >> Repair Instructions >> Rear Wheel Bearing and Hub Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
  3. GM5316676Courtesy of GENERAL MOTORS COMPANY

    Rear Wheel Speed Sensor (2) @Rear Suspension Knuckle - Remove - Rear Wheel Speed Sensor Replacement (J56, JL9) , or Rear Wheel Speed Sensor Replacement (J57, J6H)

  4. Rear Wheel Drive Shaft@Rear Wheel Hub - Separate
  5. GM4247503Courtesy of GENERAL MOTORS COMPANY

    Rear Brake Rotor (1) - Remove - Rear Brake Rotor Replacement (JL9, J56) , or Rear Brake Rotor Replacement (J6H) , or Rear Brake Rotor Replacement (J57)

  6. GM5338409Courtesy of GENERAL MOTORS COMPANY

    Rear Wheel Hub Bolt (1) - Remove [3x]

  7. GM5338411Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The rear brake shield (2) will become dislodged when the rear wheel hub (1) is removed.

    Rear Wheel Hub (1) - Remove