Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
Rear Wheel Hub (1) - Remove - Rear Wheel Bearing and Hub Replacement
Align the front and rear wheel hub bolt (1) with the relief (2) on the rear wheel hub.
Use the CH-43631 Ball Joint Separator (1) to release the front and rear wheel hub bolt (2) from the flange.
Front and Rear Wheel Hub Bolt (1) - Remove and DISCARD