Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
- Remove the front wheel speed sensor harness retainer from the front suspension strut bracket.
Remove the brake hose fitting bolt (2) from the front suspension strut bracket and reposition the front brake hose. Front Brake Hose Replacement (J56) , or Front Brake Hose Replacement (JL9) , or Front Brake Hose Replacement (J57, J6H)
- Front Stabilizer Shaft Link@Front Suspension Strut - Remove - Stabilizer Shaft Link Replacement (FE2) , or Stabilizer Shaft Link Replacement (FE3, FE4)
Steering Knuckle Nut (1) - Remove [2x]
- Steering Knuckle Bolt (2) - Remove [2x]
Front Suspension Strut Upper Mounting Nut (1) - Remove [3x]
Front Suspension Strut (1) - Remove
- Transfer components as necessary.