Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Position the steering knuckle (1) onto the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Front Suspension Strut (1)@Steering Knuckle - Install - Strut Assembly Removal and Installation (FE2, FE3, witout F55) , or Strut Assembly Removal and Installation (FE3, FE4, with F55)
Courtesy of GENERAL MOTORS COMPANY

Front Lower Control Rear Link (1)@Steering Knuckle - Install - Front Lower Control Rear Link Replacement (RWD)
Courtesy of GENERAL MOTORS COMPANY

Front Lower Control Front Link (1)@Steering Knuckle - Install - Front Lower Control Front Link Replacement (RWD)
Courtesy of GENERAL MOTORS COMPANY

Steering Linkage Outer Tie Rod (1)@Steering Knuckle - Install - Steering Linkage Outer Tie Rod Replacement (without Blackwing) , or Steering Linkage Outer Tie Rod Replacement (with Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Front Wheel Hub (1) - Install - Front Wheel Bearing and Hub Replacement (RWD)
Courtesy of GENERAL MOTORS COMPANY

Front Brake Shield (1) - Install - Front Brake Shield Replacement (JL9, J56) , or Front Brake Shield Replacement (J57, J6H)
Front Brake Rotor - Install - Front Brake Rotor Replacement (J56) , or Front Brake Rotor Replacement (JL9) , or Front Brake Rotor Replacement (J57) , or Front Brake Rotor Replacement (J6H)
Install the front tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
Remove the support and lower the vehicle.
Measure and adjust the wheel alignment. Wheel Alignment Measurement