Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Position the steering knuckle (1) onto the vehicle.
- Front Suspension Strut@Steering Knuckle - Install - Strut Assembly Removal and Installation (FE2, FE3, witout F55) , or Strut Assembly Removal and Installation (FE3, FE4, with F55)
- Front Lower Control Rear Link@Steering Knuckle - Install - Front Lower Control Rear Link Replacement (AWD)
- Front Lower Control Front Link@Steering Knuckle - Install - Front Lower Control Front Link Replacement (AWD)
Front Wheel Hub (1) - Install - Front Wheel Bearing and Hub Replacement (AWD)
- Steering Linkage Outer Tie Rod@Steering Knuckle - Install - Steering Linkage Outer Tie Rod Replacement (without Blackwing) , or Steering Linkage Outer Tie Rod Replacement (with Blackwing)
- Front Brake Shield - Install - Front Brake Shield Replacement (JL9, J56) , or Front Brake Shield Replacement (J57, J6H)
Front Brake Rotor (1) - Install - Front Brake Rotor Replacement (J56) , or Front Brake Rotor Replacement (JL9) , or Front Brake Rotor Replacement (J57) , or Front Brake Rotor Replacement (J6H)
- Install the front tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
- Remove the support and lower the vehicle.
- Measure and adjust the wheel alignment. Wheel Alignment Measurement