Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Front Stabilizer Shaft Link (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Front Stabilizer Shaft Link Nut- Lower (1) - Install and tighten130 N.m (96 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Front Stabilizer Shaft Link Nut- Upper (1) - Install and tighten120 N.m (89 lb ft)
Install the front tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
Remove the support and lower the vehicle.