Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
Some components not shown for graphic clarity.
Front Seat Outboard Seat Back Airbag (2) - Install
- Front Seat Outboard Seat Back Airbag Nut (1) - Install and tighten [2x] - Fastener Specifications
- Connect the electrical connector.
- Position the rear of the front seat back cover to the original location.
- Zip the left and right front seat back cover zippers.
- Enable the SIR System. SIR Disabling and Enabling
- Inflatable Restraint Module Handling and Scrapping
CAUTION:
Refer to Fastener Caution .
NOTE:
Hold both sides of the trim together while pulling straight down on the zipper.