Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Following the deployment of a side impact air bag, inspect the following parts for damage. Replace these parts if necessary:
- The seat cushion frame
- The seat recliner, if equipped
- The seat adjuster
- The seat back frame
Failure to do so may cause future personal injury.
- Disable the SIR system. SIR Disabling and Enabling
Use a thin flat-bladed tool to release the upper spring clip retainers.
- Front Seat Back Cushion Finish Panel (1) - Remove
Reposition the front seat back cover and pad as needed.
- Front Seat Outboard Seat Back Airbag Nut (1) - Remove [2x]
- Remove the connector position assurance (CPA) from the module electrical connector.
- Disconnect the electrical connector.
- Remove the front seat outboard seat back airbag (2) through the bottom opening of the chute.
WARNING:
Refer to SIR Warning .